HPN4 INOX Flow-wrapper

EXTERIOR

• Machine built in stainless steel.
• Mechanical and electronic elements of the machine at the rear inside easily accessible cabinets.
• Easy-access adjustable control panel with embedded 10-inch touch screen.

INPUT

• Feeding belt with 2500 mm loading area.
• Easy removal of the fabric for cleaning.
• Servomotor drive.
• Product detection by photocells.
• Entrance guides adapted to the product.
• Fully removable belt for cleaning outside the line.

REEL HOLDER

• Motorized reel holders with film tension control by three-phase motor that guarantees a constant film tension from the beginning to the end of the reel and adjustable from the screen.
• Dual motorized side loading reel holders.
• Automatic film change.

FORMING BOX

• Variable forming box depending on the product, adjustable in height and width.
• Width adjustment by servomotor.

LONGITUDINAL SEALERS

• Longitudinal welding with servomotor drive.
• Adjustment of the sealing center through the screen and with automatic positioning by servomotor.
• 6 Pairs of film drag rollers:
  • 1st set of adjustable pull rollers.
  • 2nd set of Preheating rollers to seal.
  • 3rd set of heated rollers for sealing.
  • 4th set of heated rollers for sealing.
  • 5th set cutting blade block or polyolefin welding block.
  • 6th set of rubberized rollers for leftover output.
• Pneumatic opening of the sealing rollers from the screen.
• Individual adjustment of the pneumatic pressure of each sealer with pressure regulators from the touch screen in a precise way.
• Possibility of working with a gas introduction kit.

CROSS SECTION

• BOX MOTION type clamp for cross sealing actuated by servo motor.
• Adjustment of the welding center driven by Servomotor and adjustable automatic positioning from the screen.
• Adjustment of the working height of the adjustable clamp from the screen to adapt to the height of the product.
• Cross seal width 400 mm. with perfect tightness.
• ZIG – ZAG cutting blade.
• Possibility of working with a flat jaw for vacuum bagging, a toothed jaw for standard Flow Pack bagging or a jaw for polyolefin.
• Option to install a presser kit for the extraction of air from the package.

SCRAP COLLECTOR

• Servomotor drive.
• Tension regulation of the remaining film with a rocker and adjustable from the screen.
• Surplus intake capacity with 400mm disc.
• Regulation of the rocker arm tension through pneumatic input.

FUNCTIONS

• Adjustment of bag length, cutting speed, etc. from the touch screen.
• Possibility of automatic adaptation of the length of the bag to the length of each product individually.
• Possibility of working with a fixed bag length.
• Possibility of bagging with brand printed on film.
• Memorization of parameters up to 100 products.
• No product no bag function.
• Detection of incorrectly positioned product or product under clamp.
• Stop with open transverse sealing bars.
• Automatic stop of the machine in case of obstruction of the sealing bars with electronic force limiter.
• Drastic reduction of the time spent in changes of manufacturing orders by including in the product recipes the values of the pressure of the sealants, the position of the cross section, the tension of the film and all changes automatically and immediately when changing the product to pack.

ELECTRONIC EQUIPMENT

• Machine control through a programmable controller for maneuvers with a state-of-the-art dedicated axis controller card through a fiber optic field bus to control the axes with servomotors.
• Electronic machine equipped with independent servomotors (entry, former, cross section, sealing rollers, belts and unwinding).
• Motorized self-centering double reel holder.
• Embedded 10” color touch screen, with IP65, which makes it easy to see the status of the machine at all times and its durability.
• Electronic speed servodrives in belts and sealers.
• Sealing temperature regulators with fine adjustment and integrated Autotuning with full configuration and control from the touch screen.
• Mercotac in thermal sensors.
• Acoustic and luminous reel end warning.
• Substitution of Servomotors and Servodrives in a simple way, the configuration values ​​of that ServoDrive remain in the axis controller, so restarting the machine after a substitution makes it work without the need for any other action, which facilitates substitutions and saves time in breakdowns.
• Backup/Restore function both in the PLC and in the Touch Screen to facilitate the replacement of these 2 elements, again saving time in the event of a breakdown.
• Possibility of viewing both the machine manual and the electrical diagrams on the touch screen.
• Possibility of connecting the machine to the Internet (Belca’s own VPN totally secure) to provide remote assistance, facilitating the detection of possible faults or making functional changes in the PLC and/or Touch Screen, this connection can be made via Wi-Fi (putting the machine in the company’s Wi-Fi network) or via RJ45 cable (the client will provide an Ethernet network cable with internet access)
• The connection of the machine to the customer’s network will allow access from any device (PC, SmartPhone, Tablet) to display screens with information on the real-time status of the machine (this access can be restricted by password).

SAFETY RULES

• Protections and security systems in accordance with European and American standards.
• General switches provided with safety systems.
• Transmission areas, chains, etc.… duly closed.
• CE certified, the machine conforms to the Machinery Directive 2006/42 / CE.

• Bioriented Polypropylene: Glossy film for non-shrink automatic bagging. (BOPP)
• Shrink Polyolefin: Heat shrinkable plastic film with high resistance, gloss and transparency. (POF)
• Complex Films: Film composed of two or more components to guarantee sealing, from 40 to 150 microns.
• Shrink barrier films: Barrier film for prolonging the preservation of the product.
• Paper: Different types and thicknesses.

Production: up to 80 packs / min (depending on the length and characteristics of the product and the film to be used). From 7.6 to 30.4 m / min

Cross section width: 400 mm

Feeding belt length: 2,500 mm

Feeding belt width: 330mm

EXTERNAL DIMENSIONS:

• Length: 5,950 mm
• Width: 1,705 mm
• Height: 1,963 mm
• Weight: 750 kg

PRODUCT DIMENSIONS:

• Length: 75mm – Unlimited
• Width: 10 – 330 mm
• Height: 5 – 230 mm

REEL DIMENSIONS:

• Max. Width: 1.000 mm
• Reel core diameter: 76 mm
• Maximum reel diameter: 300 mm

ELECTRICAL INSTALLATION:

• Voltage: 400 V AC3 + Neutral
• Installed power: 15,75 Kw

Request extended information using the attached form.